Spider X Flash Holster Kit V3
Spider X Camera Holster v3
The Spider Accessory Holster v3 can be attached directly to the Spider Belt or any other belt and provides quick access to your camera (up to 2.3 kg) and other photo equipment such as an external flash, light tube, gimbal, selfie stick, binoculars and more! The housing of the Spider X Holster is made from wear-resistant carbon fibre resin and features a strong spring steel clip, allowing it to withstand years of intensive use without compromise.
The holster is equipped with a two-position locking system, designed to give you full control over your workflow:
Position 1: Automatic lock – As soon as a Spider v3 Plate Pin or other Spider v3 accessory is inserted, the holster locks automatically and your camera is secured. To release the camera, lift the lever and remove it. The holster returns to automatic lock mode.
Position 2: Quick-draw mode – Push the lever upwards until you hear a click. The holster then remains open for quick access. When you need maximum security again, simply push the lever back down to activate automatic lock mode.
Pro Adhesive Accessory Tab v3
The self-adhesive Spider Accessory Tabs are the perfect way to attach both flat and curved surface devices to your Spider Holster v3 / Gear Dock v3. Ideal for a flash, light meter, battery pack and more! The Pro Tabs are made from highly durable composite nylon and genuine 3M adhesive, and are resistant to daily wear and tear in any working environment. The unique profile of the Spider Tab prevents rotation and bouncing, while keeping your device firmly seated in the Spider Holster.
Installation instructions for devices with a FLAT SURFACE (such as a battery pack):
1. Remove the original belt clip (if applicable).
2. Thoroughly clean the surface of your device with isopropyl alcohol.
3. Remove the protective film from the 3M adhesive and press the Spider Tab firmly for one minute.
4. Wait 24 hours before putting load on the Spider Tab, to allow the adhesive to cure fully.
Installation instructions for devices with a CURVED HANDLE (such as a flash):
1. Thoroughly clean the surface of your device with isopropyl alcohol.
2. Remove the protective film from the 3M adhesive and press the Spider Tab firmly for one minute.
3. Thread the included cable ties through the slots on the underside of the Spider Tab.
4. Trim the cable ties neatly after attachment.
Please note: This product is not compatible with Spider v2 equipment.
