Free delivery on orders over £100

Very Good 4.35/5 by 34,094 customers

5-year warranty, included automatically
Customer service

H&Y K-Series Holder Mark III (Holder only, no adapters)

Article number:

12577563

H&Y K-Series Holder Mark III (Holder only, no adapters)
H&Y K-Series Holder Mark III (Holder only, no adapters)
  • H&Y K-Series Holder Mark III (Holder only, no adapters)
  • H&Y K-Series Holder Mark III (Holder only, no adapters)
  • H&Y K-Series Holder Mark III (Holder only, no adapters)
  • H&Y K-Series Holder Mark III (Holder only, no adapters)
£104,-

Ordered today, shipped today.
H&Y K-Series Holder Mark III (Holder only, no adapters)
H&Y K-Series Holder Mark III (Holder only, no adapters)
£104,-

Get notified

    Free delivery on orders over £100

    No hidden fees - price includes duty & taxes
    Rated 4.35 by 34,094 photographers

    Your photo and video specialist since 1995
The H&Y K-Series Holder Mark III (Holder only, no adapters) is a redesigned and improved version of the popular magnetic filter holder from the K-series. The key improvement over the previous Mark II model is the switch from a retractable screw-locking system on the rear to a magnetic + slide-locking mechanism, making installation much faster and more intuitive.

H&Y K-Series Holder Mark III (Holder only, no adapters)

The filter system uses metal or magnetic frames compatible with most 150x100mm and 100x100mm filters, including H&Y filters, but can also be used with Lee, NiSi, Formatt Hitech, Kase, and Benro filters. Thanks to the magnetic frame, filters click easily into the filter holder and can be locked in place.

The KH3 filter holders are made from aircraft-grade aluminium, which is exceptionally strong and lightweight. The matt black anodised finish is resistant to corrosion and the elements. Compatible with slot filters of 100x100mm and 100x150mm. No unwanted light leakage, even during long exposures. To prevent the filter from shifting, one side of the guide rail features a screw that locks the filter frame when turned.

The side guides are marked, so you can note or record the exact position of the filter if you need to remove it for any reason, and then reposition it accurately. On the rear of the filter holder there is a slot for 95mm drop-in H&Y filters. This greatly increases the versatility of the system, allowing you to insert an ND filter or a CPL circular polarising filter. Drop-in filters slide into the slot and are held in place by two small pads, which correspond to notches milled into the aluminium frame of the drop-in filter.

Features of the H&Y K-Series Holder Mark III (Holder only, no adapters)

  • The holder is fully compatible with existing magnetic square filters and drop-in filters from the K-series, preserving the popular magnetic functionality and efficient filter workflow.
  • The adapter rings are now compatible with the REVORING Swift Magnetic Adapter (RM-AR) system. This enables simple, tool-free attachment with a single button press, significantly reducing setup time.
  • Note: The KH3 is exclusively compatible with Swift Magnetic Adapter Rings [RM-ARxx], designed with ultra-thin profiles for wide-angle lenses.
  • The conventional adapter rings [SAR-xx] supplied with earlier K-series filter holders are not compatible.
  • Unlike the previous generation, which supported threaded filters up to 86 mm, the new system now supports threaded filters up to 95 mm, expanding the range of applications. The slimmer design of the system also minimises vignetting.
  • A two-point slide-lock mechanism secures the holder to the adapter ring. Additionally, magnetic filter lock screws keep filters firmly in place, even when struck from behind, which is particularly useful in outdoor environments such as riverbanks.
  • With earlier K-series 100 mm square filter holders, square filters could come loose when struck hard from behind. With the Mark III, you now benefit from the convenience of magnetic filters and enhanced safety, ideal for use near water or in rough environments where dropping filters is unacceptable.
  • In addition to the classic magnetic filter cap LC100 for the mount, the new system introduces a magnetic filter cap [LC-82F] that fits directly onto the adapter ring when the mount is removed (compatible with all RM-AR formats).

In the Box

  • 1x KH3 filter holder
  • 1x Protective case
Dimensions & Weight
Weight (g) 160.0 g
General
Color Black
Properties
Filter size (mm) 100.0 mm
System size 100mm
Material & Protection
Material Aluminum

Ask a question

About the H&Y K-Series Holder Mark III (Holder only, no adapters). We’ll send you an email to confirm your question. As soon as one of our experts has answered, you’ll get a notification by email.