Peak Design PROpad
The Peak Design PP-2 PROpad is an accessory for the Capture. While using heavy camera-lens combinations, the PP-2 PROpad increases the carrying comfort and stability of the Capture.
21.-
19. 95
Delivered within 2 to 3 working days
The Peak Design PP-2 PROpad is an accessory for the Capture. While using heavy camera-lens combinations, the PP-2 PROpad increases the carrying comfort and stability of the Capture.
Reviews
Description
The Peak Design PROpad has been designed with the professional photographer in mind and is an accessory path for the Capture Camera Clip v3. The construction offers better stability when carrying heavy cameras, resulting in improved safety and comfort. The pad is laminated with weatherproof nylon around the outside, is anthracite-colored and can be used during bad weather conditions.
The PROpad can be easily installed by pulling a strap through the inner loop and attaching the clip to the lower part of the fabric. This makes the camera accessible at waist height, so that your equipment is always within reach. Alternatively, you can let the Capture v3 run through the loop itself to clamp the pad on each belt up to 7.6 cm wide and 1.9 cm thick.
Features of the Peak Design PROpad
- Stabilizing accessory for heavy equipment
- For belts up to 7.6 cm wide and 1.9 cm thick
- Can be attached to your trousers belt
- Increased comfort and safety
- Laminated with weather-resistant nylon
In the Box
- Peak Design PROpad
The Peak Design PROpad has been designed with the professional photographer in mind and is an accessory path for the Capture Camera Clip v3. The construction offers better stability when carrying heavy cameras, resulting in improved safety and comfort. The pad is laminated with weatherproof nylon around the outside, is anthracite-colored and can be used during bad weather conditions.
The PROpad can be easily installed by pulling a strap through the inner loop and attaching the clip to the lower part of the fabric. This makes the camera accessible at waist height, so that your equipment is always within reach. Alternatively, you can let the Capture v3 run through the loop itself to clamp the pad on each belt up to 7.6 cm wide and 1.9 cm thick.
Features of the Peak Design PROpad
- Stabilizing accessory for heavy equipment
- For belts up to 7.6 cm wide and 1.9 cm thick
- Can be attached to your trousers belt
- Increased comfort and safety
- Laminated with weather-resistant nylon
In the Box
- Peak Design PROpad
Specifications
Info | |
---|---|
Article number | 12241906 |
Info | |
---|---|
Article number | 12241906 |